Leading 10 typical forklift crashes ， forklift procedure must focus on these matters ！.

Leading 10 typical forklift crashes ， forklift procedure must focus on these matters ！.

Blog Article

Do not ignore the forklift at the workplace. If the procedure is bad, there will be serious mishaps in minutes, and there are lots of mishaps including forklifts.

Situation 1: The forklift freight obstructed the vehicle driver's view, and the individual ahead might not be discovered, leading to a rolling mishap.
Situation 2: In order to preserve the balance of the forklift when lifting heavy items, the staff members utilized their body weight as the weight, which nearly triggered casualties.
Situation 3: The width of the forklift cargo exceeds the allowed size of the path and hangs on the roadside shelf, which almost creates an crash.
Situation 4: Forklift is speeding and rolls over throughout a turn.
Situation 5: The forklift chauffeur did not discover the pedestrian, and the pedestrian did not notice the forklift.
Instance 6: The forklift raises the workers illegally, the forklift vehicle driver does not put on the seat belt, the forklift lifter falls and the vehicle driver is squashed when the forklift rolls over.
Instance 7: The forklift vehicle driver did not use a seat belt and dropped from the car when it rolled over and was squashed.
Forklift operation should pay attention to these issues ：.

Start.
1. Prior to starting, observe the surroundings, and after verifying that there are no obstacles that prevent the security of driving, honk the horn initially and then begin.
2. For cars with hydraulic (air pressure) brakes, the brake hydraulic stress (air pressure) scale must be secure before beginning.
3. When the forklift starts with a tons, the driver must first validate that the load is stable and reliable.
4. The begin must be sluggish and steady.

Driving.
1. When driving, the height in between the bottom end of the fork and the ground ought to be maintained 300mm-400mm, and the mast ought to be slanted backward. .
2. Do not raise the fork too high when driving. When going into and leaving the work site or while driving, beware that there will certainly be no obstacles in the sky. When the lots is taking a trip, the fork should not be elevated too high, which will impact the security of the forklift. .
3. After unloading, the fork must be decreased to the normal driving position prior to driving. .
4. When transforming, if there are pedestrians or vehicles nearby, the driving signal ought to be released initially. High-speed sharp turns are restricted. High-speed doglegs will certainly create the vehicle to lose lateral security and tip over. .
5. When the forklift is downhill, it is strictly prohibited to shut off the fire and slide, and it is restricted to brake suddenly while driving with loads unless there are special scenarios.
6. When the forklift is running, it has to comply with the traffic rules in the factory and must keep a certain security distance from the car in front. .
7. When the forklift is running, the tons needs to remain in the lowest setting that does not impede the driving, and the gantry ought to be appropriately slanted back. The tons shall not be raised except when stacking or loading. .
8. The elevation of the lots have to not obstruct the vehicle driver's view. In unique scenarios, when the product affects the forward vision, drive at a low speed when turning around.
9. It is restricted to switch on the ramp, nor to drive across the ramp. .
10. The safe driving rate of the forklift in the manufacturing facility location is 5 km/h, and it should drive safely at a low rate when going into the production workshop area. .
11. When the forklift is raised, raised or driven, it is forbidden for personnel to depend on the fork to hold products and play a balancing duty. .
12. If troubles are discovered, they will certainly be repaired and reported in a timely way, and they will certainly never ever operate with diseases or conceal them.

packing and dumping.
1. When fork-loading items, the distance between the two forks should be adjusted as required to make the lots of the two forks well balanced and not manipulated, and one side of the product should protest the shelf. .
2. It is restricted to work with a solitary fork or use a fork top or draw. In unique scenarios, security warning signs should be set up to advise bordering pedestrians. .
3. In the process of filling and dumping things, the forklift should be braked with the brake. .
4. The speed of the vehicle need to be sluggish and constant. Be careful not to roll the wheels on the dunnage, so as not to extend the rolled items and hurt people. .
5. When using a fork to fork the goods, the fork should be as deep as feasible under the lots, and it should be noted that the fork pointer must not touch other products or objects. The lots should be stabilized with very little back tilt of the gantry to ensure that the load does not move in reverse. The pole can be tilted ahead a little when the lots is decreased to enable simple positioning of the lots and removal of the forks. .
6. It is prohibited to fork items at high speed and ram tough objects with the fork head. .
7. When the forklift is working, it is forbidden for individuals to stand around the fork, so as to prevent the collapse of the goods and hurt individuals. .
8. Overloading is restricted, and it is prohibited to make use of forks to raise employees to participate in high-altitude procedures to stay clear of high-altitude dropping crashes. .
9. It is not permitted to use the brake inertia to slip, put, round or roll objects. .
10. It is not enabled to make use of forks to select, turn pallet discharge.

Leaving .
1. It is prohibited to leave the forklift when the products on the fork impend. Prior to leaving the forklift, you must dump the goods or lower the fork framework.
2. Draw the hand brake deal with to dead or depress the parking brake button.
3. The engine is switched off and the power is removed. (Except for special conditions, such as the motorist does not leave the lorry's line of vision and does not surpass 1 min).
4. Get rid of the key. .

Forklift Operation Precautions.
1. Before and after the forklift procedure, the appearance should be inspected, and fuel, lubing oil and cooling water should be included.
2. Inspect the safety and security efficiency of beginning, running and braking.
3. Examine whether the lights and horn signals are total and effective.
4. Throughout the operation of the forklift, examine whether the stress and temperature level are regular.
5. After the forklift is running, the outside leak ought to additionally be checked and the seals must be changed in time.

Forklift Safety Operation Specifications.
1. You need to check before leaving the vehicle;.
2. When you encounter someone before you throughout driving, you need to send a signal at a distance of 5 m;.
3. The driving rate in the manufacturing facility does not exceed 5 km/h;.
4. When driving, the low point of the cargo need to be 0.3 m ~ 0.4 m above the ground;.
5. The turning must not be also sharp to avoid the propensity of "free switching";.
6. Adding and down the incline needs to be slow-moving and uniform, and no turning on the slope is enabled.
7. Do not drive throughout the slope. When the slope is greater than 10%, the vehicle must be driven backwards when declining;.
8. When the forklift personnel bring the goods and move on, if they experience large or heavy products and most likely to the motorist's view, they should take the turning around workout
.
The "Eight Prohibitions" must be complied with in Electric Forklift Truck for Warehouse the procedure.
1. Solitary fork operation is not enabled.
2. It is not allowed to raise the goods for far away driving.
3. It is not Stand-on Electric Pallet Stacker permitted to pick up the goods by passing on the pallet with the fork.
4. It is not allowed to straight shovel chemicals, flammables and other unsafe chemicals with forks.
5. It is not permitted to utilize inertia force to pick up the goods.
6. It is not permitted to make use of stopping force to expatriation round or easy-to-roll things.
7. It is not allowed to bring individuals to work on the pallet or fork, and it is strictly prohibited to stand under the fork after the fork is elevated.
8. Do not drive laterally on slopes
.
Parking is not permitted under the following conditions.
1. Contours, slim roadways, train crossings;.
2. Sections with a longitudinal slope above 5%.
3. When there is an barrier on one side of the roadway, the contrary side of the area with the same length as the challenge must be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844